Pipe and Tube Roll Bender - Rock-n-Roller
Made in
the USA
This Pipe and Tube Roll Bender has a CW/CCW gear-driven rotation, for rolling pipe, tube pipe, solid stock, etc.. Make tube circles or large radius pipe or tube bends. Heavy-duty plate design, powered by a 3 HP 220V single-phase motor. The pipe and tube roller has 2 bottom gear-driven rollers, operated from the control arm, forward & reverse operation. This center roller is controlled up/down hydraulically.
- Floor-style 3-Roll Bender/Vertical Working Plane
- Optional Knurled Lower Rollers
- Top Roll Adjusts Up/Down Hydraulically with Manual Position Scale or Optional Digital Readout
- Heavy Steel Plate Frame
- 2" Hardened Shafts
- 6" Rollers
- Lateral Adjustable Guides
- Low Maintenance
- Easy to Operate
- Optional Tooling
- One Year Warranty
| Material Cross Section | Material Dimensions | Min | Tooling Notes |
|---|---|---|---|
 |
1-1/2" x 3/8" | 20" | Standard Rolls |
 |
3-1/4" x 5/8" | 20" | Standard Rolls |
 |
1-1/8" | 24" | Standard Rolls |
 |
1-1/2" x 11 GA | 24" | Standard Rolls |
 |
2" x 1" x 12 GA | 40" | Standard Rolls |
 |
2" Stem | 20" | Standard Rolls |
 |
2" Stem | 20" | Standard Rolls |
 |
2" x 1" | 18" | Standard Rolls |
 |
2" x 1" | 18" | Standard Rolls |
 |
1-1/4" | 24" | Rod Rolls |
 |
1.25" SCH 40 Pipe | 36" | Tube/Pipe Rolls |
 |
1-1/2" x 11 GA Tube | 40" | Tube/Pipe Rolls |
 |
1-1/2" x 3/16" | 22" | Special Tooling |
 |
1-1/2" x 3/16" | 24" | Special Tooling |
| Model # | Depth | Height | Width | Weight |
|---|---|---|---|---|
| RB20 | 36" | 40" | 36" | 960 lbs |
| Drive Motor: 3 H.P. | ||||
| Shafts: 2" | ||||
| Rolling Speed: 16 FPM | ||||
| Roller Diameter: 6" | ||||
